Tag Archives: right angle gear motor

China supplier Right Angle  Helical-Bevel Gear Motor Geared Reducer Gearbox for Crusher double stage helical gearbox

Product Description

 

Product Description

 

Product Description

-K Series Helical Bevel Gearbox

Product Features
1. Input mode: Coupled motor, belted motor, input shaft or connection flange.
2. Output: Right angle
3. Compact structure. Rigid tooth face. Carrying greater torque, high loading capacity.
4.High precision gear, ensuring the unit to operate stably, smooth transmission.
5. Low noise, long lifespan. Large overlap coefficient, abrasion resistant.

 

Product Parameters

1. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

2: Design option
 

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with CZPT shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with CZPT shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special 1 ,the flange is required to be connected

Materials Data Sheet

 

Housing material

Grey Cast iron

Housing hardness

HBS163~255

Gear material

20CrMnTi alloy steel

Surface hardness of gears

HRC58°~62 °

Gear core hardness

HRC33~48

Input / Output shaft material

40Cr alloy steel

Input / Output shaft hardness

HRC32~36

Machining precision of gears

accurate grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat treatment

tempering, cementiting, quenching, normalizing, etc.

Efficiency

94%~96% (depends on the transmission stage)

Noise (MAX)

60~68dB

Temp. rise (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.

Brand of oil seal

NAK — ZheJiang or other brands requested

 

Detailed Photos

 

 

Our process of production

Our product line

 

Company Profile

 

Company Profile

Bode  was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q1: Are you trading company or manufacturer?
A: We are factory.

Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.

Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q5: What information shall we give before placing a purchase order?
A:  a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
     b) Housing color.
     c) Purchase quantity.
     d) Other special requirements.

Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery

If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂 
 

 

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step
Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

helical gearbox

Helical Gearbox

Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.

Right angle helical gearboxes

Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.

Crossed-axis helical gears

Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.helical gearbox

Inline helical gears

Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.helical gearbox

Helix angle

Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
China supplier Right Angle  Helical-Bevel Gear Motor Geared Reducer Gearbox for Crusher   double stage helical gearboxChina supplier Right Angle  Helical-Bevel Gear Motor Geared Reducer Gearbox for Crusher   double stage helical gearbox
editor by CX 2023-04-21

China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Centrifugal Mills manufacturer

Merchandise Description

 

Solution Description

 

Item Description

-K Collection Helical Bevel Gearbox

Merchandise Characteristics
1. Input method: Coupled motor, belted motor, enter shaft or relationship flange.
2. Output: Right angle
three. Compact construction. Rigid tooth face. Carrying greater torque, high loading potential.
four.Large precision gear, making certain the device to operate stably, easy transmission.
five. Lower sound, extended lifespan. Large overlap coefficient, abrasion resistant.

 

Merchandise Parameters

one. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input energy rating(kw) .18~three .eighteen~3 .eighteen~5.5 .18~5.5 .37~11 .75~22 1.3~thirty three~45 7.5~90 eleven~a hundred and sixty eleven~two hundred 18.5~two hundred
Ratio 5.36~
106.38
five.eighty one~
131.87
6.fifty seven~
145.fifteen
seven.fourteen~4
four.79
seven.22~
192.18
seven.19~
197.27
8.95~
a hundred seventy five.forty seven
eight.74~
141.ninety three
8.68~
146.07
12.66~
a hundred and fifty.03
seventeen.35~
164.forty four
17.97~
178.37
Maximum Torque(N.m) 200 four hundred 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

two: Design choice
 

K series gear units are available in the following designs
KAZ..Y.. Quick-flange-mounted helical-bevel gear models with hollow shaft
K…Y… Foot-mounted helical-bevel gear models with CZPT shaft
KAT…Y… Torque-arm-mounted helical-bevel equipment models with hollow shaft
KAB…Y… Foot-mounted helical-bevel equipment models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft enter helical-bevel equipment units
KA…Y… Helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel equipment units with CZPT shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear models
KAF…Y… Flange-mounted helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the unique 1 ,the flange is needed to be related

Components Info Sheet

 

Housing materials

Grey Solid iron

Housing hardness

HBS163~255

Gear substance

20CrMnTi alloy metal

Area hardness of gears

HRC58°~sixty two °

Gear main hardness

HRC33~forty eight

Input / Output shaft substance

40Cr alloy steel

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

accurate grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat therapy

tempering, cementiting, quenching, normalizing, and so on.

Effectiveness

ninety four%~96% (is dependent on the transmission phase)

Sound (MAX)

60~68dB

Temp. increase (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Manufacturer of bearings

China top brand bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, SKF, FAG, INA, NSK.

Manufacturer of oil seal

NAK — ZheJiang or other brand names asked for

 

Detailed Images

 

 

Our approach of production

Our item line

 

Business Profile

 

Company Profile

Bode  was started in 2007, which is positioned in HangZhou metropolis, ZHangZhoug province. As 1 skilled maker and exporter, we have much more than 17 years’ expertise in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare elements. We have manufacturing unit with sophisticated creation and examination products, the strong growth of group and creating capability offer our buyers with higher high quality products. Our merchandise commonly served to various industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, medicine, wood and so forth. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any inquiries, very good offer often for you for lengthy time period organization.

FAQ

Q1: Are you buying and selling firm or maker?
A: We are manufacturing unit.

Q2: What sorts of gearbox can you generate for us?
A: Main products of our company: R, S, K, F collection helical-tooth reducer, RV sequence worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for every customized drawing?
A: Indeed, we provide custom-made services for customers.

This autumn: Can we acquire 1 personal computer of every product for good quality testing?
A: Yes, we are glad to acknowledge trial get for quality testing.

Q5: What info shall we give before positioning a obtain buy?
A:  a) Kind of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
     b) Housing color.
     c) Purchase amount.
     d) Other specific specifications.

Q6: How extended is your shipping and delivery time?
A: Generally it is 5-10 times if the products are in stock. or it is 15-twenty times if the items are not in inventory.

Q7: What is your phrases of payment ?
A: thirty% Advance payment by T/T soon after signing the agreement.70% ahead of supply

If you are fascinated in our item, welcome to contact with us.
Our staff will do our ideal to meet up with your want 🙂 
 

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Helical Gearbox

Using a helical gearbox can greatly improve the accuracy of a machine and reduce the effects of vibration and shaft axis impact. A gearbox is a circular machine part that has teeth that mesh with other teeth. The teeth are cut or inserted and are designed to transmit speed and torque.helical gearbox

Sliding

Among the many types of gearboxes, the helical gearbox is the most commonly used gearbox. This is because the helical gearbox has a sliding contact. The contact between two gear teeth begins at the beginning of one tooth and progresses to line contact as the gear rotates.
Helical gears are cylindrical gears with teeth cut at an angle to the axis. This angle enables helical gears to capture the velocity reversal at the pitch line due to the sliding friction. This leads to a much smoother motion and less wear. Moreover, the helical gearbox is more durable and quieter than other gearboxes.
Helical gears are divided into two categories. The first group comprises of crossed-axis helical gears, commonly used in automobile engine distributor/oil pump shafts. The second group comprises of zero-helix-angle gears, which do not produce axial forces. However, they do create heat, which causes loss of efficiency.
The helical gearbox configuration is often confounded, which results in higher working costs. In addition, the helical gearbox configuration does not have the same torque/$ ratio as zero-helix angle planetary gears.
When designing gears, it is important to consider the effects of gear sliding. Sliding can lead to friction, which can cause loss of power transmission. It also leads to uneven load distribution, which decreases the loadability of the helical planetary gearbox.
In addition, the mesh stiffness of helical gears is commonly ignored by researchers. An analytical model for the mesh stiffness of helical gears has been proposed.

Axial thrust forces

Several options are available for axial thrust forces in helical gearboxes. The most obvious is to use a double helical gear to offset the force component. Another option is to use a thrust bearing with a lower load carrying capacity. This becomes a sacrificial component.
In order to transmit a force, it must be distributed along the contact line. This force is the sum of tangential, radial and axial force components. All these components must be transferred from the source to the output. This is a complex process that involves the use of gears.
The axial force component must be transferred through the gears. The resultant force is then divided into orthogonal components and divided into the thrust directions. The radial force component is from the contact point to the driven gear center.
The axial force component is also determined by the size of the gear’s pitch diameter. A larger pitch diameter results in a greater bearing moment. Similarly, a larger gear ratio will produce a higher torque transmission.
It should be noted that the axial force component is only a small part of the total force. The normal force is distributed along the contact line.
The double helical gear is also not a perfect duplicate of the herringbone gear. It has two equal halves. It is used interchangeably with the herringbone gear. It also has the same helix angle.helical gearbox

Reduced impact on the shaft axis

Increasing the helix angle of a gear pair will reduce resonance effects on the shaft axis of a helical gearbox. However, this will not reduce the overall vibration in the gearbox. In fact, it will increase the vibration. This can lead to serious fatigue faults in the drive train.
This is because the helix angle has an effect on the contact line between two teeth. As the helix angle increases, the length of the contact line decreases. In addition, it has an effect on the normal force and curvature radii of the teeth. The pressure angle also affects the curvature radii.
Helical gears have several advantages over spur gears. These advantages include: lower vibration, NVH (noise, vibration and harshness) characteristics, and smooth operation under heavy loads. They also have better torque capability. However, they produce higher friction. They also require unique approaches to control their thrust forces.
The first step in reducing resonance effects is to regulate the meshing frequency of the helical gear stage. This can be done by varying the shift factors in the gear. If the shift factors are too large, then the gear will experience resonance effects. The helix angle is also affected by the gear’s shift factors. It is therefore important to control the gear’s geometry in order to reduce the resonance effects.
Next, the effects of the web structure and rim thickness on the root stress of the gear are examined. These are measured by strain gage. The results indicate that the maximum root stress is obtained when the worst meshing position is reached.

Quieter operation

Compared to spur gears, helical gears are much quieter in operation. This is due to their larger teeth. Aside from this, they have a higher load-carrying capacity. They also run smoother and have a higher speed capability. Helical gears are also a good substitute for spur gears.
The most significant parameter relating to noise reduction is the gear contact ratio. It ranges from below 1 to more than 10 and is determined by the number of teeth intersecting a parallel shaft line at the pith circle. It is also a good indicator of the level of noise reduction that helical gears provide.
In addition, helical gears have a lower impulse flexure than spur gears. This is because the contact point slides along the helical surface of each tooth. This also adds internal damping to the gear system.
While helical gears are less noisy than spur gears, they do have a high level of wear and tear. This can affect the performance of the gear. However, it is possible to improve the smoothness of the tooth surface by grinding. In addition, running the gears in oil can also help improve the smoothness of the tooth surface.
There are many industries that use helical gears. For example, the automotive industry uses them in their transmissions. They also are used in the agricultural industry. They are often used in heavy trucks.
Helical gears are also known to generate less heat and are quieter than other gears. They can also deliver parallel power transfers between parallel or non-parallel shafts.

Improved accuracy

Increasing the accuracy of a helical gearbox is the key to its operation and reliability. The accuracy of the gearbox is dependent on several features. Among the most important are the profile and lead. Moreover, the power requirements of a gear drive should be taken into consideration.
The profile is the most sensitive feature of a helical gear. If the profile is not symmetric, the gear will run with a noisy spur gear. In addition, the profile is also the most sensitive to lead.
A helical gearbox plays a key role in the power transmission of industrial applications. However, the heavy duty operating conditions make it susceptible to a variety of faults.
A helical gearbox’s performance depends on the accuracy of the individual gears. This is accomplished by minimizing the backlash. A common way to reduce backlash is to approach all target positions from a common direction. This approach also reduces transmission noise.
The accuracy of a helical gearbox can be improved by using a flexible electronic gearbox. This can reduce the degree of twist. Moreover, it can increase the accuracy of gear machining.
A helical gearbox with an electronic gearbox can increase the accuracy of twist compensation. It can also improve the linkage between B-axis, C-axis, and Z-axis. Moreover, the electronic gearbox will ensure the linkage relationship between Y-axis, Z-axis, and C-axis.
The accuracy of a helical Gearbox can be improved by calculating the position error of the gear train. Pitch deviation and helix angle deviation are two types of position error.helical gearbox

Reduced vibration

Using helical gearboxes can reduce vibration and noise. These gears are used in a variety of applications, including automotive transmissions. Moreover, these gears are quiet enough to operate in noise-sensitive applications.
Using CZPT software, three different gearbox housing designs are compared. The external dimensions and mass of each design are kept constant, but different quantities of longitudinal and transverse stiffeners are employed. The resulting models are then compared to experimental results. In addition, the free vibration response of these models is analyzed. The results are shown in Fig. 5.
In terms of noise reduction, the cellular model produces the lowest sound pressure level. However, the cross model produces the higher sound level. The cellular model also produces better peak to peak results.
The input-stage gear pair is the power source of the output-stage gear pair. The output-stage gear pair’s vibration is also studied. This includes a phase diagram and a frequency-domain diagram. The influence of the driving torque and the pinion’s velocity on the vibration is studied in a numerical manner. The time evolution of the normal force and the lubricant stiffness is also studied.
The input-stage pinion modification reduces the input-stage gear pair’s vibration. This reduction is achieved by adding dual bearing support to the input shaft.
China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Centrifugal Mills     manufacturer China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Centrifugal Mills     manufacturer
editor by CX 2023-04-04

China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Cement Mills helical gearbox diagram

Product Description

 

Solution Description

 

Merchandise Description

-K Collection Helical Bevel Gearbox

Solution Characteristics
1. Input mode: Coupled motor, belted motor, input shaft or relationship flange.
two. Output: Right angle
three. Compact composition. Rigid tooth confront. Carrying greater torque, higher loading capability.
4.Large precision equipment, making certain the unit to operate stably, clean transmission.
5. Lower sounds, lengthy lifespan. Large overlap coefficient, abrasion resistant.

 

Merchandise Parameters

1. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Enter energy score(kw) .eighteen~3 .18~3 .18~5.five .18~5.5 .37~eleven .75~22 1.3~thirty 3~45 7.5~ninety 11~one hundred sixty 11~two hundred 18.5~two hundred
Ratio 5.36~
106.38
5.81~
131.87
six.57~
145.15
7.14~four
4.79
seven.22~
192.18
7.19~
197.27
eight.ninety five~
175.forty seven
eight.74~
141.93
eight.sixty eight~
146.07
12.66~
one hundred fifty.03
seventeen.35~
164.forty four
17.ninety seven~
178.37
Greatest Torque(N.m) two hundred four hundred 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

2: Layout selection
 

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear models with CZPT shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear models
KA…Y… Helical-bevel gear models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel equipment models with CZPT shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft enter combinatorial helical-bevel gear models
KAF…Y… Flange-mounted helical-bevel equipment units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the unique 1 ,the flange is required to be connected

Components Knowledge Sheet

 

Housing content

Grey Solid iron

Housing hardness

HBS163~255

Gear content

20CrMnTi alloy steel

Area hardness of gears

HRC58°~sixty two °

Gear core hardness

HRC33~48

Enter / Output shaft substance

40Cr alloy steel

Input / Output shaft hardness

HRC32~36

Machining precision of gears

exact grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth remedy

tempering, cementiting, quenching, normalizing, etc.

Efficiency

94%~96% (is dependent on the transmission stage)

Sounds (MAX)

sixty~68dB

Temp. rise (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand name of bearings

China best brand bearing, HRB/LYC/ZWZ/C&U. Or other brand names requested, SKF, FAG, INA, NSK.

Model of oil seal

NAK — ZheJiang or other makes requested

 

Detailed Pictures

 

 

Our procedure of generation

Our solution line

 

Business Profile

 

Company Profile

Bode  was started in 2007, which is situated in HangZhou city, ZHangZhoug province. As 1 expert company and exporter, we have a lot more than seventeen years’ encounter in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare components. We have manufacturing unit with innovative creation and examination gear, the robust development of group and producing ability offer our clients with large quality products. Our merchandise commonly served to numerous industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, medicine, wood and many others. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to inquire us any inquiries, excellent supply usually for you for prolonged expression enterprise.

FAQ

Q1: Are you buying and selling firm or manufacturer?
A: We are manufacturing unit.

Q2: What types of gearbox can you produce for us?
A: Main goods of our company: R, S, K, F collection helical-tooth reducer, RV sequence worm gear reducer,H Sequence Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for every custom drawing?
A: Indeed, we offer you customized service for customers.

This fall: Can we purchase 1 pc of each and every product for high quality screening?
A: Of course, we are happy to accept trial get for good quality testing.

Q5: What data shall we give ahead of positioning a acquire buy?
A:  a) Kind of the gearbox, ratio, input and output variety, enter flange, mounting place, and motor informationetc.
     b) Housing color.
     c) Acquire amount.
     d) Other specific demands.

Q6: How prolonged is your shipping and delivery time?
A: Typically it is 5-10 times if the products are in stock. or it is fifteen-twenty days if the items are not in stock.

Q7: What is your phrases of payment ?
A: 30% Advance payment by T/T following signing the agreement.70% before supply

If you are fascinated in our product, welcome to get in touch with with us.
Our crew will do our greatest to satisfy your require 🙂 
 

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

NVH Characteristics of Helical Gearbox

Typically, a helical gearbox is used in the transmission of torque, speed, or both. Its primary function is to rotate a circular machine part while simultaneously meshing with other toothed parts. It operates on the same principle as a lever.helical gearbox

Typical applications

Typical applications of helical gearboxes include conveyors, blowers, and elevators. They are also used in the construction of plastics and rubber. Their basic benefits include reduced vibration, lower noise levels, and high load carrying capacity. They are also known to be more durable and quiet than spur gears.
There are several factors that should be taken into consideration when choosing the right gear set for a particular application. These include power requirements, torque requirements, and the environment in which it will operate. Also, bearings and lubricants will need to be considered.
Helical gears are used for heavy load applications, as they provide a high load-carrying capacity. They also are less expensive than spur gears. However, their efficiency is lower than spur gears. This is due to the fact that helical gears have larger teeth. They also have a lower dynamic load than spur gears. This reduces wear and tear on the gears.
Helical gears are also used in high-speed applications. They can also be used with non-parallel shafts. They are typically chosen over spur gears for non-parallel applications. However, helical gears are prone to misalignment due to axial thrust. This can be corrected by adjusting the bearing position.
Helical gears can also be used as power transmitting gears. They are commonly used in transmissions in the automotive industry. They are also used in a wide range of other industrial applications. These include blowers, feeders, coolers, and conveyors. They can also be used in the food and oil industries.
The most common types of helical gearboxes are single and double helical gearboxes. Single helical gears have one helical section that is parallel to the axis. Those with a circular arc curved tooth are also available.

NVH characteristics

NVH characteristics of helical gearbox are a major consideration in the development of new driveline products. NVH can be quantified using wavelet analysis, order analysis and statistical energy analysis. These techniques are typically used in the frequency domain, but can also be used in the real time domain.
The most basic NVH method uses a modal analysis to quantify the transmission noise. Simplified models use sinusoidal stiffness variations, but can also be used to study special effects.
One of the most important aspects of NVH is the integrity of the signal chain. The signal chain is affected by the gear meshing impact and the main transmission housing excitation. The first step in quantifying NVH is to establish a signal chain. This can be done by comparing the signals that are recorded on an analog to digital converter or hard disk. Then, using fast Fourier transforms, signals are converted from the time domain into the frequency domain.
For NVH analysis, it is important to obtain a representative prototype of the production vehicle. This is necessary early in the design phase, as changes to the final product often require substantial design modifications.
For helical gearboxes, the main benefit of reverse module configuration is that the radial type gearbox is more economical to produce. The radial type gearbox uses the same tooth-cutting tools as a spur gear, but can be produced more economically.
The basic characteristics of helical gears are that they have more surface contact and are more powerful in their carrying capacity. Because of this, the helical gearbox is typically used for high-load applications. However, helical gearboxes tend to produce lower efficiencies than spur types.
Thermal deformation of bearings can also change NVH characteristics of a helical gear transmission system. In this study, the effects of bearing temperature rise on the nonlinear dynamic characteristics of a helical gear system are investigated.helical gearbox

Helix

Compared to conventional gears, helical gears have more surface contact and produce less noise. These gears are a great choice for home and light industrial applications, especially where high-efficiency is required.
Helical gears produce axial thrust force through a special lubricant. They are used in different industries, such as automotive, oil, food, plastic, and textile. They are also used in blowers, feeders, and geared motors.
In helical gears, there is a special tooth at an angle to the axis of rotation. This tooth retains contact while the gear rotates into full engagement. Typically, the angle between the helix and the axis of rotation is 15 to 30 degrees. This angle is important for determining the number of teeth.
Compared to a straight cut gear, a helical gear has a higher power to weight ratio. This means that the helical gear can accommodate a higher load.
Helical gears are typically paired, with each gear containing a v-shaped tooth. The v-shaped tooth is designed to allow for a greater contact ratio, while maintaining an acceptable minimum amount of bottom clearance. However, the tooth tip may fracture if it is too thin.
A mathematical definition of the helix angle is important for the design of a helical gear. The helix angle is defined in the section on geometry of helical gear teeth.
The angle between the helix and the axial axis of rotation is used to calculate the axial contact ratio of a gear. This ratio is defined as the sum of the total number of contact lines, or teeth. If the overlap ratio of a gear pair is zero, then the axial contact ratio is also zero.
A helical gearbox can be a highly efficient transmission system, but may suffer from transmission error. This is the result of the axial thrust force, which is dissipated when it enters contact with an opposing tooth. To minimize the amount of power loss in a helical gear box, several approaches have been developed.

Transverse and normal planes of the teeth

Generally, helical gear teeth have two planes: the transverse and normal planes. The normal plane is perpendicular to the pitch plane. The transverse plane is perpendicular to the axial plane.
When a tooth is in contact, the load is normal to the surface at the contact point. This is known as the pressure angle. This angle is a function of the tooth’s radial position on the shaft axis. The angle can also be used to describe the shape of a tooth.
In helical gears, the normal pressure angle is the angle of the load line into the plane normal to the tooth axis. It is important to know the pressure angle when calculating the forces in a helical gear pair. This angle is usually between 15 and 30 degrees.
The helical gearbox is the most widely used gearbox. It consists of a set of helical gears connected by parallel shafts. It is also used in blowers, textile, sugar, and marine applications. It has a higher contact level and less vibration than conventional gears.
Helical gears can be used in feeders, blowers, and rubber and plastic applications. They are quieter than conventional gears, which is especially important in the food industry. They also transfer larger loads. They are also durable and can be used in blowers.
Helical gears have a slanted tooth trace. They are less noisy than conventional gears, which makes them ideal for marine applications. They also transmit rotation smoothly. They have an effective axial thrust force and transmit less vibration. They are used in many industrial applications, including the oil industry and the food industry.
Helical gears on non-parallel shafts have two major circles: the pitch circle and the root diameter. These circles can be different, so different tooth shapes can be used in the radial module system.helical gearbox

Impact of external thrust on helical gears

Considering that gearboxes are often a key component of power transmissions, the impact of external thrust on gearboxes has been investigated. This paper presents a theoretical model, accompanied by experimental measurements. In particular, this paper focuses on the effects of the thrust collar on the transfer path.
The thrust collar has been successfully proven to reduce the axial thrust between helical gears. It also reduces the acoustic impact of the gearbox by attenuating the radiated sound power. This has been accomplished by incorporating a sound damping mechanism that includes Rayleigh damping. The oil film that surrounds the thrust collar is another damping element.
In addition to reducing gearbox vibration, the oil film damping may attenuate coupled degrees of freedom. To test this, a theoretical model of a gearbox equipped with a thrust collar was developed. This model was then used in a gearbox dynamics simulation model to analyze the effects of the thrust collar on the transferpath.
The first partial model shows how the oil film and the radiated sound power could alter the acoustic performance of a gearbox. In particular, the sound pressure levels of exciting frequencies are compared at the top cover of the gearbox in the vertical direction. This was done using an accelerometer.
The second partial model is a simulation of airborne sound from the gearbox housing. This is done using the compound of the motor excitation and the meshing excitation. This is done by measuring the frequency of radiated sound at four different combinations of torque and speed.
In addition, the helical gear has been sliced into an arbitrary number of cross sections. Each gear is then mounted on a shaft, which rotates with a different timing. The helical gear is compared to a corresponding spur gear for comparison. The spur gear has a higher root stress, but its relative contact stress isn’t nearly as big as that of the helical gear.
China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Cement Mills     helical gearbox diagramChina Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Cement Mills     helical gearbox diagram
editor by CX 2023-03-31

China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Rod Mills helical gearbox application

Solution Description

 

Solution Description

EasyFit  SYSTEM

The EasyFit Method tremendously improves the performance of cooperation with our associates. In a couple of steps, they are then assembled into geared motors in assembly facilities and sellers around the world. The final assembly of the 3 parts requires only 5 minutes.

S4 Family members

SP4 Parallel shaft equipment motor (F Sequence)

Foot, flange mounting, integrated motor, hollow shaft/reliable shaft design and style

Output Torque Range: two hundred – 15000 Nm

Ratio Range:   i = 3.5 – 30000

Electrical power Variety: .twelve – ninety kW

Dimension Design: 1-eight

 

SK4 Right angle shaft gear motor (K Sequence)

Foot, flange mounting, built-in motor, hollow shaft/sound shaft design and style

Output Torque Assortment:  440 – 20000 Nm

Ratio Variety:  i = 7.1 – 30000

Power Variety:  0.twelve – ninety kW  
 
Size Product:  2-nine

 

SI4 Inline kelical equipment motor (R Collection)

Foot, flange mounting, built-in motor

Output Torque Range:  200 – 25000 Nm

Ratio Assortment:  i = 2.8 – 30000

Energy Selection:  0.twelve – 90 kW

Size Model:  1-9

 

Solution Parameters

Kind SK Series Bevel-Helical Gear Reducer
Design SKZN26,SKZN36,SKZN46,SKZN56,SKZN66,SKZN76,SKZN86,SKZN96
Size Type 2 ~ 9
Color RAL5015 Sky Blue/ GNORD Special Colour / RAL9002 Pearl While / RAL9005 Black / Customer Request
Material Housing: GG20,GG40 high-strength cast iron
Gear: 17CrNiMo6
Enter/Output Shaft: 42CrMo alloy steel
Bearing NSK or NTN 
Seal S.K.F or Simrit
Machining Precision of gears Accurate grinding, 6-7 Grade
Lubricating oil Chevron Meropa/ Shell / Mobil
Warranty 1 Year
Packing Fumigation wooden case

 

Products’ End End users Demonstrate

 

Add-ons

Company Profile

   GNORD is the brand name affiliated to Acorn Industrial Corporation in United Stated and a subsidiary with total capital and holdings from Chinese listed firm. GNORD Push has originated from German and American technologies because 1908. The creation foundation is positioned in HangZhou, ZheJiang , covering an location of 50000  square meters and with 1st section investment decision of quantity RMB 4 hundred million yuan (Sum to about USD 64 million). GNORD has the total capabilities of design, analysis and improvement, generation, advertising and marketing and services in the fields of all kinds of transmission methods and high precision elements. With the high amount of merchandise R&D and manufacturing capabilities, GNORD focuses on offering products in numerous fields and all-spherical solutions, which mainly face to the global high-end transmission industry.
    The merchandise quality assurance of GNORD is derived not only from the acquisition of  equipment of equally equipment motors and gearboxes from HangZhou Rexnord Transmissions Co.,Ltd as properly as the intellectual house rights of CZ08 gearbox of United States and S4 collection equipment motor production line of Germany, but also from the using in excess of of factory staffs from HangZhou Rexnord which incorporate the workers of creation, R&D and sales team of equipment motors and gear bins. Xihu (West Lake) Dis.d by many patents and innovative production strategies, GNORD are now specializing in the production of equipment motors, gearboxes,  special gearboxes for higher functionality welding robot and other related transmission gadget and elements, etc.
 

Sample Place

Exhibition

 

US $49-599
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Conical – Cylindrical Gear
Step: Double-Step

###

Customization:

###

Type SK Series Bevel-Helical Gear Reducer
Model SKZN26,SKZN36,SKZN46,SKZN56,SKZN66,SKZN76,SKZN86,SKZN96
Size Type 2 ~ 9
Color RAL5015 Sky Blue/ GNORD Special Colour / RAL9002 Pearl While / RAL9005 Black / Customer Request
Material Housing: GG20,GG40 high-strength cast iron
Gear: 17CrNiMo6
Input/Output Shaft: 42CrMo alloy steel
Bearing NSK or NTN 
Seal S.K.F or Simrit
Machining Precision of gears Accurate grinding, 6-7 Grade
Lubricating oil Chevron Meropa/ Shell / Mobil
Warranty 1 Year
Packing Fumigation wooden case
US $49-599
/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Conical – Cylindrical Gear
Step: Double-Step

###

Customization:

###

Type SK Series Bevel-Helical Gear Reducer
Model SKZN26,SKZN36,SKZN46,SKZN56,SKZN66,SKZN76,SKZN86,SKZN96
Size Type 2 ~ 9
Color RAL5015 Sky Blue/ GNORD Special Colour / RAL9002 Pearl While / RAL9005 Black / Customer Request
Material Housing: GG20,GG40 high-strength cast iron
Gear: 17CrNiMo6
Input/Output Shaft: 42CrMo alloy steel
Bearing NSK or NTN 
Seal S.K.F or Simrit
Machining Precision of gears Accurate grinding, 6-7 Grade
Lubricating oil Chevron Meropa/ Shell / Mobil
Warranty 1 Year
Packing Fumigation wooden case

Why Choose a Helical Gearbox?

Choosing a helical gearbox is an important decision for any machine builder. It can help you to reduce maintenance costs, improve productivity and efficiency, and ensure that your equipment operates quietly and efficiently. In addition, it can also be compact in size and easy to install.helical gearbox

High productivity and efficiency

Compared to spur gears, helical gears have high productivity and efficiency. This is due to the fact that the helical gearbox is more effective at transferring power between right-angle configurations. Helical gears are also quieter. They also have the ability to tolerate a greater load. These gears are usually used in high-load applications, such as automotive transmission applications.
The basic features of helical gears include a slanted tooth face, a larger contact ratio, and a smoother performance. Helical gears are also less expensive than spur gears. They have more power carrying capacity, longer life, and are easier to maintain.
There are many factors that affect the efficiency of helical gearboxes. Some of them include the number of stages, reduction ratio, ambient conditions, and lubrication. They are also affected by the number of teeth.
Power loss in helical gears is mainly due to friction and heat. There are various approaches to minimize these losses. One approach is to analyse power losses using a numerical method.
Other factors that affect the efficiency of helical systems include speed, noise, and the number of teeth. The amount of power lost in gear mating is dependent on the load.

Low power consumption

Compared to other types of gearboxes, helical gearboxes have low power consumption. This is because they can tolerate more load, conduct smooth performance, and are quieter. They also require less oil changes and have a longer life span.
Helical gears have special teeth that are cut at an angle. The teeth are designed to engage gradually, rather than quickly. They can transfer power between parallel configurations and right-angle configurations.
Helical gearboxes are the most widely used gearboxes. They are also the most efficient. They can work at 98% efficiency. However, they are more expensive than spur gears. They can be packaged with oil-filled housings. They have less noise and require less maintenance. They can operate cooler, and have more torque capacity.
Helical gearboxes have two types: single and double helical gears. In the single type, the gears are perpendicular to the axis. They are usually used in automotive transmission applications. They can also be used in forward velocities. In the double type, the helical faces are next to each other.
Helical gears work at higher ratios, which increases their efficiency. They are also less noisy than spur gears. They are a good choice for applications that require high torque capacity. The basic efficiency of helical gearboxes ranges from 90% to 99.5%. They are also easier to operate and have a longer life span. They are suited to a wide range of applications.helical gearbox

Compact in size

Having a shiny new set of wheels is a nice change of pace. You get to sit in style and you get to drive it like the pro. The trick is finding the right one at the right time. Fortunately, there are plenty of companies who know how to build a high quality car that can be afforded by the average Joe. You’ll find all types of cars from sports coupes to hatchbacks. You’ll also find all types of drivers from the young professional to the seasoned veteran. You’ll also find all types of roads from main streets to back roads. There are even all types of parking spaces to choose from. With a bit of planning and some research, you’ll find the perfect fit for you and your family. You can’t help but wonder why you didn’t choose a vehicle with this many perks sooner. It’s a nice way to spend a night on the town, without having to worry about a parking fee. The next time you’re in the mood to take the family out to the country for a weekend in the great bluffs, you’ll know which ones to avoid.

Noise-free operation

Compared to spur gears, helical gears have better speed capability and quieter operation. However, helical gearboxes often have problems that stop their service. These faults result in increased productivity costs. These problems include fatigue, chipping tip, crack and missing tooth.
In this paper, we propose a novel signal processing scheme to detect gearbox faults at constant speed. The method involves the use of spectral subtraction (SS) to remove the spectral noise of a signal. This approach is widely used in speech signal processing. It is also used to estimate real-time noise information. The method was successfully applied to the analysis of gearbox faults.
The spectral subtraction technique is applied to the transmission error and to the side-band frequency feature. The side-band frequency is equal to the rotation frequency of the input shaft. A square envelope spectrum method is used to obtain the spectral feature. It was then used to obtain the corresponding fault signal. The method is then compared with experimentally measured noise data.
It is also important to note that the side-band feature is not stable in different noise levels. The optimal demodulation subband selection method is not obvious. However, the proposed method can obtain a stable amplitude value when SNR is low.
Another important factor that reduces noise is the overlap ratio. The overlap ratio is the sum of the transverse contact ratio and the face contact ratio. When the overlap ratio approaches one, the noise is minimized.

Improved performance at high speeds

Whether used in an industrial, automotive or power generation application, helical gearboxes provide a number of benefits over traditional spur gearing systems. These advantages include reduced noise, higher load capacity and smoother operation.
In an effort to reduce noise and improve performance at high speeds, Parker engineers developed a helical gearbox that runs quieter and produces 30-40% more torque than a conventionally modified gear. They also redesigned the entry and exit points of the gear tooth for increased efficiency and strength.
The high-speed helical geartrain has been tested at 5,000 hp power. The tests were performed in the High-Speed Helical Geartrain Test Facility at the NASA Glenn Research Center. The tests were conducted at four different design configurations and at multiple input shaft speeds. These tests included temperature increases from inlet to outlet, fling off temperatures, and power loss of the helical system.
The first step was to improve load distribution of the gear pair. This is done by modifying the microgeometry of each gear. In addition to modifying the microgeometry of each tooth, the length of the contact line was extended. This resulted in a higher tooth contact ratio.
Another option is to modify the straddle-mounted pin of the PGS. This is a complicated task because of spatial constraints. In order to determine whether the pin will have the desired effect, it needs to be tested in real-world tests.helical gearbox

Reduce maintenance costs

Compared to spur gears, helical gears have several advantages, such as less noise and vibration, greater load carrying capacity, and longer life. They also have a reduced maintenance cost.
Helical gears can be divided into two main types: single helical and crossed axis helicals. In the single helical type, two or three teeth connect at all times.
In crossed axis helicals, the shafts are inclined at a variety of angles. These gears are primarily used in non-perpendicular transmissions. They can have very low load carrying capacity, but they offer better strength and speed reduction than spur gears.
The double helical type has two mirrored rows of teeth that are angled. This type of gear is also known as a herringbone gear. It’s a design that’s ideal for non-perpendicular transmissions.
Helical gears are packaged in oil filled housings. They are a space saving gear reducer. They are used in automobile transmissions and other forward speeds. They are also used in industrial gearboxes.
Helical gears can be made of either solid or semi-solid materials. They can be sliced into an arbitrary number of cross sections. This allows the helix to be adjusted to suit the application.
It’s important to choose the right gear for your application. The gear’s design may include the number of teeth, lubricant type, surface treatment, and the tooth angle. It’s also important to choose the right lubricant, because it can affect the noise levels and the efficiency of the gear.
China Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Rod Mills     helical gearbox applicationChina Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Rod Mills     helical gearbox application
editor by czh 2023-01-20

China Gphq S Helical-Worm Gear Motor Right Angle Gearbox for Crane helical gears backlash

Solution Description

S helical worm gearbox motor/ reducer motor

S sequence is 1 kind of Helical worm gearbox ,designed as Modularization and large-stainless cast iron circumstance . It is combination of helical equipment and worm gear ,which with increased effectiveness and energy than simple aluminum worm gearbox . Owing to their fantastic efficiency, these drives can be utilised in each industrial sector and personalized to specific torque and pace specifications. The gear ratios afforded by the helical-worm gear stage and the lower sound amounts throughout procedure make these gear motor  ideal minimal-cost remedies for easy applications 

GPHQ S worm reducer motor materials 

housing substance: HT2OO high-strength forged iron
Gear materials: 20CrMnTi
Area hardness of equipment HRC58°-62°
Equipment main hardness HRC33°-40°
Input/Output shaft content 40Cr
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal place hardness HRC48 ° -55 °
Machining precision of gears materials Exact grinding 6-5 grade
Effectiveness up to 98%
Sound(Max) sixty-68dB
Temp.increase: 40°C
Vibration ≤20um
Motor IP54, F course ,B5 FLANGE 
color : blue  (if you want massive quantity ,we can done as your wanted coloration )

 Our  reduction geared motor Edge

one,reasonable price tag with excellent quality 
two,shipping and delivery in time 
3,safe ,reputable ,cost-effective and durable 
4,steady transmission ,silent operation 
5,sleek operating and low noise 
six,nice visual appeal ,durable support life 
7,large heat-radiating efficiency ,substantial carrying ability 
eight,each and every gearbox have to be analyzed before packing
nine.reply in higher effectiveness in the course of 1 working day 
ten. professional to produce gearbox and electrical motor .

If there is any concern, make sure you don’t wait to contact with me (EVA), U can ship us your inquiry. And you will get response in 1 functioning working day.
 
GEARBOX CATALOGUE :
CERTIFICATION  : 

Making Method:

Bundle : 

for 1 container, straight loading ,for considerably less, all goods with pallet.

FAQ
1, Q:what’s your MOQ for ac gearbox motor  ?
A: 1pc is alright for every single type electric powered gear box  motor 

two, Q: What about your guarantee for your induction pace reducer motor ?
A: 1 year ,but besides guy-manufactured wrecked

3, Q: which payment way you can accept ?
A: TT, western union .

4, Q: how about your payment way ?
A: 100%payment in innovative considerably less $5000 ,thirty% payment in innovative payment , 70% payment just before sending more than $5000.

5, Q: how about your packing of pace reduction motor  ?
A: plywood circumstance ,if dimension is modest  ,we will pack with pallet for less 1 container 

6, Q: What data need to be presented, if I get electric powered helical geared motor  from you ?
A: rated electrical power,  ratio or output speed,type ,voltage , mounting way , amount , if a lot more is greater .

US $50-5,000
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Layout: Bevel
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Motor Power: 0.18kw-22kw

###

Customization:

###

housing material: HT2OO high-strength cast iron
Gear material: 20CrMnTi
Surface hardness of gear HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material 40Cr
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal position hardness HRC48 ° -55 °
Machining precision of gears material Accurate grinding 6-5 grade
Efficiency up to 98%
Noise(Max) 60-68dB
Temp.rise: 40°C
Vibration ≤20um
Motor IP54, F class ,B5 FLANGE 
color : blue  (if you need big quantity ,we can done as your wanted color )
US $50-5,000
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Layout: Bevel
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step
Motor Power: 0.18kw-22kw

###

Customization:

###

housing material: HT2OO high-strength cast iron
Gear material: 20CrMnTi
Surface hardness of gear HRC58°-62°
Gear core hardness HRC33°-40°
Input/Output shaft material 40Cr
Input/Output shaft hardness HBS241°-286°
Shaft at oil seal position hardness HRC48 ° -55 °
Machining precision of gears material Accurate grinding 6-5 grade
Efficiency up to 98%
Noise(Max) 60-68dB
Temp.rise: 40°C
Vibration ≤20um
Motor IP54, F class ,B5 FLANGE 
color : blue  (if you need big quantity ,we can done as your wanted color )

How to Design a Helical Gearbox

Basically, a gear is a rotating circular machine part that has teeth cut into it to transmit torque or speed. Gears operate on a similar principle to levers. However, gears are usually asymmetrical in nature, and they have meshing teeth that work together to transmit torque or speed.helical gearbox

Helix angle

Whether you’re looking for a right angle gearbox or a helical gearbox, the angle of the teeth is an important consideration. It affects contact ratios, radial force and the torque capacity of the gear.
A helical gearbox uses the same basic elements as a spur gear, except it has teeth that are closer together. It is also more suited for high-load applications. It is also quieter than conventional gears. The main differences between a helical gearbox and a spur gear are its pitch and the helix angle.
The pitch of a helical gear is measured in the plane perpendicular to the direction of the teeth. It may also be called circular pitch. The pitch of a helical gear may be greater or less than circular pitch.
The normal pitch of a helical gear is also measured in the plane perpendicular to its direction of rotation. It is often called the reference value.
Unlike the spur gear, a helical gear does not have a unique optimum pressure angle. A helical gear’s contact ratio will decrease as the pressure angle increases. This is due to the fact that the length of the contact line decreases.
The pitch of a helical planetary gearbox can be calculated by dividing the total helix angle of the pinion and gear by the sum of their normal pressure angles. The helix angle is usually between 15 and 30 degrees.

Center distance

During the design of a helical gearbox, the center distance between the gears is a crucial input parameter. The center distance should be accurately calculated and modified based on the actual usage conditions. Undersized center distances cause a gear to mesh at a point other than the pitch point, which can lead to increased noise, premature wear and amplitude modulated vibrations.
The best way to calculate a helical gear’s center distance is to calculate the helix angle. This is often referred to as the fundamental rule of gearing. The helix angle is a mathematical expression that defines the relationship between the transverse and normal planes of the gear tooth. The pitch circle diameter increases with helix angle.
The number of teeth in a gear is also a relevant input parameter. There are a number of considerations to consider for determining the helix angle, such as the tooth depth, the pitch diameter, the number of teeth, and the radii of the index circle. The tooth depth is a useful way to calculate bottom clearance.
During the design of a helical mesh, the radial and axial thrust forces are produced. The angular backlash of a gear may vary depending on the type of gear, the pitch diameter and the transmission ratio. The total length of contact lines varies more gradually with the helix angle.
The number of cross sections in a helical mesh is also important. The radial module form is more economic to manufacture. The helical gearbox can be produced by using the same tooth cutting tools as spur gears.

Backlash

Having a smooth rotation of meshing gears is important. However, backlash is an issue that needs to be addressed. There are several ways of controlling backlash. The amount of backlash required depends on the application, size, and accuracy of the gears.
There are two basic ways of reducing backlash. The first is to decrease the distance between the gear centers. The second is to use spring loaded gears. The latter works better in low torque unidirectional drives.
The difference between the distances is called the transverse contact ratio. The longer the distance, the more rotational motion is required. The angular backlash is the opposite of the radial backlash.
The backlash may also be measured in terms of the angular distance between two gears. This measurement can be converted into an angular value at the operating pitch circle. A worm gear is another example.
Using the correct backlash calculator can determine the correct amount of backlash for your helical gearbox. The amount of backlash depends on the accuracy of the individual gears and the type of gearbox.
The gearbox also has components like pulleys, bearings, and wheels. There are several ways of reducing backlash, including the use of bolts and shims to decrease the center distance between gears. In heavy duty applications, a rigid bolted assembly is common.
To calculate the backlash of a geartrain, one must know the gear ratio of each gear in the train and how much it is mated to the reference shaft. This information is especially helpful for cumulative backlash.helical gearbox

Durability

Optimal design, materials, manufacturing, and maintenance procedures affect the lifecycle of a gear. This includes production, repair and replacement costs. The optimum maintenance schedule must also account for lifecycle costs.
The life of a gear can be extended by proper tooth tip relief. This will reduce wear, improve meshing, and increase the longevity of your gear.
The helical gearbox is a specialized type of gearbox, which transforms power from one right angle axis to another. Typical applications include automotive transmissions. It is a popular choice in applications with high speed, high load, or non-parallel shafts. It is quieter and smoother than spur gears. The modular production method used in helical gearboxes provides the best possible standard for component integrity and performance.
One of the most important components of a helical gearbox is the thrust bearings. These support the thrust forces created by the gears and can absorb some of them. A helical gearbox is best suited for high load applications that require a smooth gearing motion.
A good helical gearbox is one that is manufactured with bearings that can handle axial loading. A helical gearbox with a central gulley is often needed for tool clearance. The helix angle also has a bearing on its durability.
The helix angle is also the source of the largest thrust force produced by a helical gear. This large thrust force is produced by a series of special angle cut teeth. This may be one of the reasons why helical gears have been used in high speed applications.

Noise

Generally speaking, helical gears are considered to be a relative quieter gear than spur gears. It is estimated that a helical gear set with axial contact ratio of 2 is about 19 dB quieter than a spur gear set with the same contact ratio.
The term “whine” is often used to describe the tonal character of gear noise. This is a function of the dynamic forces that act on the gear mesh. The dynamic forces are related to rotational speed.
There are two main types of gear noise: the gear-specific noise and peripheral component noise. Both of these types can be caused by high-speed gears transmitting the power of an engine.
The gear-specific noise may be related to the number of teeth in contact. A low contact ratio can slow down the rotational speed of the driven gear. However, a high contact ratio will not reduce the transmission error. This is why it is important to prioritize your design intent before attempting any noise reduction measures.
The tonal character of gear noise can be determined by collecting and analyzing data over a period of time. This may include a series of tests at loads within the desired load range. This measurement can serve as a starting point for a gearbox’s root cause analysis.
The gear-specific noise has a number of mechanisms. These include the aforementioned transmission error signal and the gear-specific whine.helical gearbox

Applications

Various industries like plastics, printing, cement and other heavy industrial settings use helical gearboxes. Their advantages include low power consumption, quieter operation and high load application. However, there are some limitations. For example, heat generated by sliding contact is a hindrance to efficiency. It should also be noted that gear weight affects the performance of the gear.
There are two ways to mesh helical gears. The first method is to place the shafts oriented at a certain angle of helix, in a mesh. The second method is to place the shafts oriented in a different angle of helix. The difference in angle is referred to as the helix angle.
The helical gearbox is the most widely used gearbox. It is compact in size and works at a high efficiency. It is useful for driving conveyors, coolers and machines. It is also used in automation control systems.
Helical gears are often chosen over spur gears for non-parallel shafts. They are also used in gearboxes for automotive applications and in elevators. They also reduce vibrations.
The gears are made of special teeth that are angled to an axis. They are also cut at an angle. This allows for perpendicular meshing. They can be divided into two basic categories: crossed axis gears and single helical gears. Single helical gears can be right-handed or left-handed. Crossed axis gears are usually used to connect parallel shafts.
China Gphq S Helical-Worm Gear Motor Right Angle Gearbox for Crane     helical gears backlashChina Gphq S Helical-Worm Gear Motor Right Angle Gearbox for Crane     helical gears backlash
editor by czh 2023-01-01

in Ribeirao Preto Brazil sales price shop near me near me shop factory supplier Atg Pgrh Series Right Angle Helical Gear Planetary Gearbox for Servo Motor manufacturer best Cost Custom Cheap wholesaler

  in Ribeirao Preto Brazil  sales   price   shop   near me   near me shop   factory   supplier Atg Pgrh Series Right Angle Helical Gear Planetary Gearbox for Servo Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

we have received the believe in of consumers throughout the world. Entire use has been created of all varieties of advanced tactics and engineering to reach excelsior producing. There is a technological heart of province stage, EPG academician working station, experiment station for EPG post doctors, and national 863 program established up in EPG team. With these platforms and strong complex potential, the more than four hundred technicians have created all selection of special large exact and higher power items, executed mould applications for essential components in the vehicle and national business revitalizing program, ensuing more than 5000 produced in excess of, between which 33 products are autonomous patent technological innovation with 4 patent authorized . PGRH Series

Merchandise Attributes:

(one) Lower Noise:UnEPTT65db.
(two) Low Backlash:Backlash is unEPTT3 arcmin . Backlash for two-phase pace reduction is with in five arcmin.
(three) EPT Performance:1-phase up to 95% or far more,two-phase up to ninety two% or more.

(4) EPT Input Velocity:Enter velocity allows for up to 8000RPM.

(five) EPT Torque:EPT torque output than that of conventional planetary EPT EPTTs
(6) Upkeep-Free of charge:Low grease put on,can be life span lubrication
(7) EPT Speed Reduction Ratio:Speed ratio is in excess of one/a thousand.

Advantage:

Utilization:

  1. Aerospace,army market.
  2. Health care wellness,electronic data market.
  3. Industry robots,Creation EPTT,CNC EPTT instrument producing industry.
  4. EPT,EPT,EPT,Foodstuff,EPTlurgical.
  5. EPTal defense engineering,Warehouse EPT market.

Model ILLUMINATE:

Equipment BOX Efficiency Info:

MODUL NO. Stage RATIO sup1 PGRH42 PGRH60 PGRH90 PGRH115 PGRH142 PGRH180 PGRH220
Rated output torque T2N Nm one 3 twenty fifty five a hundred thirty 208 342 588 one,one hundred forty
4 19 50 140 290 542 one,050 one,seven-hundred
five 22 sixty a hundred and sixty 330 650 1,200 two,000
six 20 fifty five one hundred fifty 310 600 1,a hundred 1,900
seven 19 35 a hundred and forty three hundred 550 1,one hundred one,800
8 seventeen 35 a hundred and twenty 260 500 1,000 one,600
10 fourteen 37 ninety five 220 370 800 1,220
14 35 140 three hundred 550 one,a hundred one,800
20 37 95 220 370 800 one,220
2 fifteen 20 50 a hundred thirty 208 342 588 one,one hundred forty
twenty 19 sixty one hundred forty 290 542 1,050 1,seven-hundred
twenty five 22 60 one hundred sixty 330 650 one,200 2,000
thirty 22 60 160 330 650 1,two hundred two,000
35 22 sixty a hundred and sixty 330 650 1,two hundred two,000
forty 22 60 a hundred and sixty 330 650 one,200 two,000
fifty 22 60 one hundred sixty 330 650 1,200 two,000
sixty 22 60 one hundred sixty 330 650 1,200 two,000
70 22 sixty one hundred sixty 330 650 1,200 2,000
eighty 22 sixty a hundred and sixty 330 650 1,200 2,000
one hundred 22 sixty ninety five 220 370 800 1,220
a hundred and twenty a hundred and fifty 310 600 one,100 1,900
one hundred forty a hundred and forty 300 550 one,one hundred one,800
160 a hundred and twenty 260 five hundred one,000 1,600
200 forty eight one hundred forty 370 520 1,220
MAX. output torqueT2B Nm one,2 three~two hundred three occasions of Nominal Output Torque
Rated enter velocity n1 rpm 1,two 3~two hundred five,000 5,000 four,000 4,000 3,000 three,000 2,000
MAX.enter pace n1B rpm one,two three~200 ten,000 10,000 eight,000 8,000 6,000 6,000 4,000
EPT Backlash P0 arcmin 1 3~twenty le2 le2 le2 le2 le2
2 fifteen~200 le4 le4 le4 le4 le4
EPT Backlash P1 arcmin 1 3~twenty le4 le4 le4 le4 le4 le4 le4
two fifteen~two hundred le7 le7 le7 le7 le7 le7 le7
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd Backlash P2 arcmin one three~twenty le6 le6 le6 le6 le6 le6 le6
two 15~two hundred le9 le9 le9 le9 le9 le9 le9
Torsional stiffness Nm/arcmin one,2 three~two hundred three 7 14 25 50 a hundred forty five 225
Max.radial force F2rB sup2 N one,2 three~200 780 one,530 3,250 six,seven hundred 9,four hundred fourteen,five hundred fifty,000
MAX.aXiHu (West EPT) Dis.al drive F2a1B sup2 N one,2 three~two hundred 350 630 1,three hundred three,000 four,000 six,200 35,000
MAX.aXiHu (West EPT) Dis.al pressure F2a2B sup2 N 1,2 three~two hundred 390 765 one,625 3,350 4,700 seven,250 twenty five,000
Provider lifestyle hr one,2 three~two hundred twenty,000*
Work efficiency eta % one three~20 ge97
2 fifteen~two hundred ge94
Excess weight kg 1 3~twenty .nine 2.one 6.4 13 24.five fifty one 83
two 15~200 1.two one.five seven.eight 14.two 27.five fifty four ninety five
Working temperature ordmC 1,two three~200 -10 ordmC~ ninety ordmC
Lubrication 1,2 three~200 Synthetic lubricating oil
Safety amount one,two three~200 IP65
Set up direction one,two 3~two hundred Any path
Noise stage(n1=3000rpm) dB one,two three~200 le61 le63 le65 le68 le70 le72 le74

Define DIMENSION:

Firm Look at:

HangEPT EPTEPTTndeyi EPT amp EPT EPTT, Ltd. is a subsidiary of EPTTiwan Jun Yi EPTTry. Jun Yi EPTTry was founded in March 1972. The business EPTTizes in the design and style, deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment and manufacturing of substantial-tech various EPTed motors and helical EPT EPTTs, worm and worm EPT EPTTs and planetary EPTTs. Our products sold to more than 30 nations around the world close to the world and get good status and many awards in the overEPTT market for many many years. In current years, to obtain EPTT creation and supply superb service,we set up subsidiary of production of planetary EPT EPTT in EPTT.

Heritage:

1972:EPTTiwan Jun Yi EPTTry is launched.
1989:It estabEPTTd a overEPTT branch company ATRUMP EPTTRY INC in Los Angeles
1995:Go the ISO9002 EPTT certification.
2003:Pass the ISO9001 good quality certification and the European CE stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd examination which enabled the goods to be sold in Europe
2013:The business established up subsidiary in EPTT to achieve EPTT production.

Factory:

Wisdom Produced In ATG,Wisdom The EPT.

EPT:

INSPECTION EPT:

FAQ:

(1) Can I be your agent?

Of course, welcome to deep cooperation. We have big marketing of ATG manufacturer in the marketplace now. For the specifics make sure you contact me.

(2) Is OEM obtainable?

Yes, OEM is obtainable. We have skilled designer to assist your brand marketing.

(3) How can I get a sample to check your quality?

Soon after price confirmation, you can need for samples to check our top quality. Totally free for the samples, but you need to shell out for the freight.

(four)What is actually your good quality promise?

We have distinct sorts of items which can satisfy various quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd.
Our QC division will test items just before shipping. We have a hundred% quality ensure to clients. We will be responsible for any high quality difficulty.

(five) How about the supply time?

The shipping and delivery time is depending on the products and the quantity. But EPTTly, the shipping time for a container is about 1 month.

Welcome to our business.

If any dilemma, come to feel cost-free to depart concept on the base of this page.

  in Ribeirao Preto Brazil  sales   price   shop   near me   near me shop   factory   supplier Atg Pgrh Series Right Angle Helical Gear Planetary Gearbox for Servo Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Ribeirao Preto Brazil  sales   price   shop   near me   near me shop   factory   supplier Atg Pgrh Series Right Angle Helical Gear Planetary Gearbox for Servo Motor manufacturer   best   Cost   Custom   Cheap   wholesaler