Tag Archives: speed reduction motor

China OEM Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer supplier

Product Description

SC Transmission long life F Series parallel shaft helical reduction FA97 gearbox with 10hp motor electric motor speed reducer

 

Model:37~167

Ratio:3.77~281.71

Input power:0.12~250kW

Output torque:3.5~37125N.m

Product overview:

F parallel helical gear reducer is manufactured according to international technical requirements, with high technology content.
saving space, reliable and durable, high overload capacity, power up to 90KW above.
low energy consumption, superior performance, reducer efficiency as high as 95%.
small vibration, low noise, high energy saving, selection of high-quality steel materials, steel cast iron box, gear surface after high-frequency heat treatment.
after precision processing, to ensure the accuracy of shaft parallelism and positioning, which all constitute the gear transmission assembly deceleration motor configuration of all kinds of motors, forming an electromechanical integration, fully ensure the quality characteristics of the product.
 

Size

97

Structure

FA

Input power rating 

1.1-30kw

Ration

4.68-270.64

Maximum torque

4300N.m

Weight

 260kg

 

Product Description

 

Ratio 3.77-276.77
Input power 0.12-200KW
Output torque 3.5-21700N.m
Output speed 5-352rpm
Mounting type Foot mounted, foot mounted with CZPT shaft, output flange mounted, hollow shaft mounted, B5 flange mounted with hollow shaft, foot mounted with hollow shaft, B14 flange mounted with hollow shaft, foot mounted with splined hole, foot mounted with shrink disk, hollow shaft mounted with anti-torque arm. 
Input Method Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor TF(Thermistor protection PTC thermisto)
TH(Thermistor protection Bimetal swotch)
Mounting Position M1, M2, M3, M4, M5, M6
Type F37-F157
Output shaft dis. 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material HT250 High strength cast iron from R97 107,137,147,
157,167,187
Heat treatment technology carbonitriding and hardening treatment
Efficiency 92%-94%
Lubricant VG220
Protection Class IP55, F class

Product Parameters

 

 

Company Profile

FAQ

 

Shipping

Application: Motor, Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Gear Shape: Helical Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

helical gearbox

Advantages of a Helical Gearbox

Usually helical gearboxes are used for industrial purposes. They are usually found in power generation units, where the input of energy is converted into output. There are several different types of helical gearboxes, including spiral and herringbone. You should familiarize yourself with the different types before choosing one for your project.

Helix angle

Generally, the angle between a gear tooth and its shaft axis is called the helix angle. This angle is important in motion conversion and power transfer. It is not to be confused with the lead angle, which is used to reference a line perpendicular to the axis of the gear.
The helical gearbox is used in several industrial applications. The oil and sugar industries, blowers, and feeders are among those that utilize helical gears. They are smoother than spur gears, and they also have quieter operation.
Helical gearboxes can be made modularly. This allows for more economical construction and interchangeability of components. These gearboxes are also used in enclosed gear systems. In a helical gearbox, each section of the box must stagger in a different direction. This helps in maintaining the integrity of the component.
Helical gears can be used in applications that require a high degree of quality control. This is necessary to minimize the effects of wear and tear. The use of extreme pressure lubricants is recommended for helical gears that operate at right angles. However, these are not recommended for bronze gears.
Besides the helix angle, the contact ratio also affects the performance of the gear. The more surface contact between the teeth, the greater the sliding. The heat produced is also detrimental to performance. It is necessary to use a lubricant that will reduce friction between the tooth surfaces. Proper lubrication reduces wear and minimizes heat.
When determining the optimum helix angle for a gear, it is important to consider the diameter of the gear. Helical gears have a minimum helix angle of 15 to 30 degrees. A higher helix angle increases the axial force generated by the gear, and a lower helix angle increases the contact stress.

Spiral gears

Using spiral gears in a helical gearbox offers several advantages, including smoothness and quiet operation. In addition, helical gearboxes are highly effective and can tolerate more load. Spiral gears are also more cost effective. However, they are more difficult to produce.
Helical gears are similar to spur gears in that they have teeth at an angle. However, the helix angle of the teeth in a helical gear is not fixed. This angle affects the position of the tooth’s contact with the mating gear. It also affects the normal force of the teeth.
The helix angle of the gear’s teeth is also dependent on the direction of rotation of the gear. For example, a spiral gear with a helix angle of 15 degrees is usually perpendicular to the axis of the gear. Similarly, a helical gear with a helix angle of 30 degrees is usually oblique to the axis of the gear.
Helical gears also provide a method for connecting shafts that are not parallel. These gears are usually used in industries such as conveyors, food industries, plastic industries, and oil industries. The main advantage of helical gears is that they are smoother than spur gears. However, the downside is higher wear and friction.
Helical gears are also used to transmit motion between parallel shafts. Helical gears are also used in high-load applications. This makes them a good choice for heavy-duty applications.
Helical gears are also superior to spur gears in load carrying capacity. Helical gears are smoother and quieter than spur gears. However, they also have a higher friction factor. In addition, they require special hobbing cutters.
Helical gears can also be classified according to their reference section in the standard plane. The center gap of helical gears with a reference section in the turning plane is the same as that of spur gears.helical gearbox

Herringbone gears

Among the different types of gearboxes, the helical gearbox is one of the most common. It is widely used in industrial applications, such as geared motors, worm gearboxes, and planetary gear trains.
A helical gear is a directional gear with a vertical axis. Its unique feature is the helix angle, which is the angle of the helix on the indexing cylindrical surface. The helix angle is set to a value of eight to fifteen degrees in design. The real radial pitch, which is the pitch of the gear when it rotates clockwise, varies with the helix angle.
Helical gears are classified according to the reference section in the turning and standard planes. Helical gears with a reference section in the standard plane have the same number of teeth as spur gears. On the other hand, helical gears with a reference section in a turning plane have the same center gap as spur gears.
The main advantage of helical gears is the high power-to-weight ratio. Aside from that, they are compact and have good meshing performance.
Another advantage is their high torque carrying capacity. This can be achieved by increasing the helix angle. The larger the helix angle, the smoother the gear’s motion. Moreover, the larger the helix angle, the larger the coincidence degree. This is useful in applications with high shock and vibration.
The production process for herringbone gears is more difficult and expensive than the other types. It is difficult to cut and shape herringbone gears. A simple gear hobbing machine is not suitable for this type of gear. However, the milling process can be used to process some herringbone gears.
Some of the problems related to herringbone gears are a lack of axial load, high friction and the interference of axial component forces. The meshing of teeth in herringbone gears can help reduce these problems.

Noise, vibration & harshness (NVH) characteristics

NVH testing is an important aspect of new driveline product development. It is typically performed during passenger car development, and is used for quality assurance of exterior and interior noise. This is an important topic in hybrid vehicles and electric vehicles, and continues to grow as the automotive industry expands.
A typical NVH test involves a rolling road dynamometer and signals are recorded and stored on a hard disk. These are then processed to produce variation distributions. Among other things, a lumped parameter system dynamics model was developed to run large size DOE studies efficiently.
Among the many components in the NVH chain, the bevel gear plays a major role in the final drive. Its characteristics are complex and time-varying, but they are important enough to be studied.
A new bevel gear OTE calculation method will be discussed in this paper. It is important to note that the NVH performance of an electric drive helical gear transmission system can be improved by thermal deformation of the bearing. It is also possible to achieve robust NVH performance in aluminum axle design by optimizing gear design, bearing optimization, and driveline system dynamics.
The gear train also has some lesser-known NVH performance characteristics. It is known that a gear train is an excitation source, and this is the topic of another study. It is also important to note that a helical gear system will exhibit non-linear behaviors when it changes working speed.helical gearbox

Applications

Compared to spur gears, helical gears offer greater load carrying capacity and smoother operation. They are also quieter, as the gears have larger teeth. These are the main reasons for their widespread use.
The main difference between helical gears and spur gears is the way teeth are cut. Teeth in helical gears are cut at an angle, in order to allow more teeth to interact in the same direction. This reduces shock loads and vibration. Helical gears are also much more durable than spur gears.
Helical gears can be used in a variety of applications. They are often chosen over spur gears for applications that require non-parallel shafts. They are also popular in the printing industry, the plastics industry, and the cement industry. They can also be used in conveyors and coolers.
Helical gears are made of a material that provides excellent durability, corrosion resistance, and a strong working load. They are also less expensive to produce. They are attached to a shaft using a press fit or adhesive. The attachment method can be a hub or an integral shaft.
Helical gears are also produced in a radial module form. This is the most economical option. This allows helical gears to be manufactured in a compact format. It also ensures that the bearing positioning requirements are met.
Helical gears are also produced with special grinding stones. These are needed for every helix angle. The helix angle determines the real radial pitch. This also affects the normal force of the tooth.
When mating helical gears to parallel shafts, they are right-handed. These gears can be made with a normal module set or by using special hobbing tools.
China OEM Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer   supplier China OEM Long Life F Series Parallel Shaft Helical Reduction Fa97 Gearbox with 10HP Motor Electric Motor Speed Reducer   supplier
editor by CX 2023-04-28

China Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox helical gearbox arrangement

Merchandise Description

If you have any concern,you should speak to us, we will go all out to provide all the buyers with high quality and services.


/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type

###

Samples:
US$ 8.2/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:
Available

|



/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type

###

Samples:
US$ 8.2/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:
Available

|


How to Choose a Helical Gearbox

Choosing the best helical gearbox is dependent on the type of application you want to use the gear for. You will need to consider the contact ratios and the total of profile shifts required.helical gearbox

Spur gears are more efficient than helical gears

Compared to helical gears, spur gears have straight teeth that are parallel to the axis of the gear. Because they are more efficient, spur gears are often used in low speed applications. However, helical gears are better for low-noise and high-speed applications. Despite their advantages, spur gears are also used in some devices.
Spur gears are not as resilient as other gears. They are less efficient at transmitting power over long distances, and they generate too much noise at high speeds. They also impose a radial load on bearings. They also produce significant vibration that can limit the maximum speed of operation.
Helical gears are better at transferring loads. They are used in a number of applications, including car transmissions, elevators, and conveyors. Helical gears also generate large amounts of thrust. They are also quieter than spur gears.
Unlike spur gears, helical gears use bearings to support their thrust load. They also have more teeth, so they can handle more load than spur gears. They can also be used in non-parallel shafts.
Helical gears are generally used in high-speed mechanical systems. They also have less wear on individual teeth and are quieter running than spur gears.
Helical gears are a refinement of spur gears. They are also used in the printing industry, elevators, and gearboxes for automobiles. They are often used in conjunction with a worm gear to distribute load. They have a higher speed capacity, but they are not as efficient as spur gears. They are used in some high-speed mechanical systems because they generate less noise and vibration.
Spur gears are commonly used in low-speed applications, like rack and pinion setups. Their design makes them more efficient at transmitting power, but they are less resilient than helical gears.
Design space is limited based on a required center distance, target gear ratio, and sum of profile shifts
Using statistically derived parameters, the authors performed a multi-objective optimization of the profile shift of two external cylindrical gears. The main objective of this study was to maximize efficiency and minimize the amount of power lost in the optimized space.
To do this, the authors used a multi-objective optimization algorithm that included all aspects of the optimal profile shift. The algorithm evaluates objective function over a series of generations to determine the best solution.
The multi-objective optimization algorithm was based on a verified optimization algorithm. This algorithm combines analytical pressure loads estimation with an effective method for calculating the deformations of the gear case. Using the aforementioned formulae, the authors were able to identify a feasible solution. The numerical calculations also showed that the corresponding specific sliding coefficients were perfectly balanced.
To identify the most efficient method for determining the profile shift, the authors selected the most efficient method based on the objectives of efficiency and mass. The efficiency objective was considered to be the largest given the small size of the resulting optimization space. This objective is useful in reducing wear failures.
helical gearbox
The largest thermal treatment of a cylindrical gear is case hardening. The ISO/TR 4467:1982 standard provides a practical guide for gears. The largest radii of the pinion and wheel are rb1 and rb2. The ratio of tooth width to base circle diameter of the pinion is normally set to less than 1.
Sliding velocity increases as the distance from the pitch point increases in the line of action
Deflections of the involute profile of a helical gear occur due to the load on the teeth. However, the optimum pressure angle for the gear is not known.
The correct pressure angle for a helical gear cannot be calculated without a surface model. Assuming the pressure is uniform over the profile, a pressure angle of 20deg would be a good bet. However, this would require a mathematical model that can be derived from the Archard wear equation.
In general, the pressure angle will be influenced by the diameter, as well as the gear mesh geometry. It is important to know the actual angle of a helical gear since this will affect the curvature of the profile, the normal force, and the radial force.
The best way to measure the pressure angle is to consider the theoretical pitch diameter. If the pitch diameter is small, then the actual angle will be smaller. This will cause a gap between the flanks. However, it can also cause the gear to deform, leading to unexpected working behavior.
One interesting tangent is the pitch plane, an imaginary plane tangent to the pitch surfaces. The pitch plane is the plane perpendicular to the axial plane of the gear cross section. It is usually used as a reference point to calculate the transverse pressure angle.
The working pressure angle is the angle of the pressure line of the gear mesh. This angle is the same as the reference pressure angle, but the length of the contact line is reduced.
The best way to calculate the working pressure angle is to use the pressure line of the gear mesh. This will give a more accurate value. The actual angle of the pressure line is also related to the transmission ratio. This ratio is usually given as the nominal ratio of angular velocities. The actual velocities will fluctuate about this ratio.

Undercut of a helical gear tooth root

Having an undercut at the pinion root can affect the distribution of load along the line of contact of helical gears. This can result in higher than nominal loads on some teeth and amplitude modulated noise.
The tooth root is affected by a number of factors, including the shape of the tooth cutting tool. The cutting tool must be designed to avoid an undercut without reducing the number of teeth. This is achieved by a process called profile shifting.
Profile shift occurs when the cutting tool changes depth, thereby preventing an undercut. It is often used in the manufacturing process to achieve a greater overlap ratio. The higher the overlap ratio, the less variation there is between the contact lines. This reduces the dynamic tooth loads and reduces noise.
The profile shift is most often associated with the cutting tool tip. This is the point where the involute profile exits the gear, before the tip begins to taper. The involute profile can be defined for every transverse section of the gear face width. The boundary point is a point of tangency between the involute and root profiles.
The involute of a circle is a common way to define a gear-tooth profile. The involute is the path traced by the point on the line when rolling on a circle. It is a useful feature for cylindrical involute gears.
The helix angle is also important to the helical gear. It allows for greater contact capacity and increases the bending capacity of the gear. It must be included in specifications for helical teeth. The angle must be measurable and include the (+-) sign.
The bending strength of a tooth depends on the shape of the root. A large undercut reduces the strength of the tooth.helical gearbox

Contact ratios

Whether a helical gearbox is dynamic or steady-state, the contact ratio is a key factor. The total contact ratio defines the average number of teeth in contact in the plane of action. It is calculated by multiplying the transverse contact ratio with the overlap ratio. The overlap ratio is always non-zero.
The total contact ratio must be 1.0 or greater for a constant speed rotation on the driven side. Gears with a low total contact ratio are known to slow down rotation of the driven gear. The total contact ratio is influenced by the length of the contact line. A high contact ratio is a good choice for dynamic loading.
A low contact ratio results in a greater amount of profile shift and a larger amount of noise. If the contact ratio is too high, it may cause excessive EAP sliding velocity and cause scuffing. In addition, an uneven load share results in amplitude modulated vibrations.
A helical gear is a pair of slim spur gears. The gears are layered in a plane that runs parallel to the face width of the gear teeth. Each gear tooth makes contact with the flank of the next gear tooth. The helical gear tooth flank is a 3-dimensional surface that is a tangent to the base circles of the gears.
The tooth shape of the helical gear tooth is also a key factor in the contact ratio. The tooth form is designed to be in relation to the work piece, tooling, dedendum coefficients, tooth forces, and tooth bending stiffness. A gear tooth form must also relate to tooth surface kinematics and microgeometry modifications.
The active profile is a region of the involute profile between the start and end points. A tooth profile that satisfies the basic law of gear-tooth action is often called a conjugate profile.
China Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox     helical gearbox arrangementChina Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox     helical gearbox arrangement
editor by czh 2023-03-24

China wholesaler Motor Gear Speed Reduction for Gear Transmission near me shop

Product Description

Attributes:
&lpar1)Large output torque
&lpar2) Protected, trustworthy, cost-effective and tough
&lpar3) Stable transmission, silent procedure
&lpar4)High heat-radiating performance, large carrying capability
&lpar5) Blend of 2 single-phase worm gear velocity reducers, conference the demands of super speed ratio
 Technical information:
&lpar1)  Iput electrical power:.06kw-15kw
&lpar2)  Output torque:4-2320N.M
&lpar3)  Velocity ratio: 5&sol10&sol15&sol20&sol25&sol30&sol40&sol50&sol60&sol80&sol100
&lpar4)  With IEC input flange: 56B14&sol71B14&sol80B5&sol90B5&mldr
 Materials:
&lpar1)   NMRV571-NMRV090: Aluminium alloy housing
&lpar2)   NMRV110-a hundred and fifty: Solid iron housing
&lpar3)   Bearing: NSK bearing & Homemade bearing
&lpar4)   Lubricant: Synthetic & Mineral
Color:
&lpar1)   Blue &sol Mild blue
&lpar2)   Silvery White
 Quality handle
&lpar1)  Good quality assure: 1 12 months
&lpar2)  Certificate of top quality: ISO9001:2000
&lpar3)   Every product should be tested just before sending

Motor power  Design pace ratio output speed output toruqe
.06kw 1400rpm NMRV030 five 280rpm  2.0N.M
NMRV030 7.5 186rpm  2.6N.M
NMRV030 10 140rpm  3.3N.M
NMRV030 fifteen 94rpm  4.7N.M
NMRV030 twenty 70rpm  5.9N.M
NMRV030 twenty five 56rpm  6.8N.M
NMRV030 thirty 47rpm  7.9N.M
NMRV030 forty 35rpm  9.7N.M
NMRV030 fifty 28rpm 11.0N.M
NMRV030 sixty 24rpm 12.0N.M
NMRV030 eighty 18rpm fourteen.0N.M
.09kw 1400rpm NMRV030 5 280rpm  2.7N.M
NMRV030 7.5 186rpm  3.9N.M
NMRV030 ten 140rpm  5.0N.M
NMRV030 15 94rpm  7.0N.M
NMRV030 20 70rpm  8.8N.M
NMRV030 twenty five 56rpm 10.0N.M
NMRV030 30 47rpm 12.0N.M
NMRV030 40 35rpm fourteen.0N.M
NMRV030 fifty 28rpm seventeen.0N.M
NMRV030 60 24rpm 18.0N.M
0.12kw 1400rpm NMRV030 5 280rpm  3.6N.M
NMRV030 seven.five 186rpm  5.2N.M
NMRV030 10 140rpm  6.6N.M
NMRV030 15 94rpm  9.3N.M
NMRV030 twenty 70rpm twelve.0N.M
NMRV030 twenty five 56rpm fourteen.0N.M
NMRV030 30 47rpm 16.0N.M
NMRV030 40 35rpm 19.0N.M
NMRV030 50 28rpm 22.0N.M
0.18kw 1400rpm NMRV030 five 280rpm  5.3N.M
NMRV030 7.5 186rpm  7.7N.M
NMRV030 10 140rpm ten.0N.M
NMRV030 fifteen 94rpm fourteen.0N.M
NMRV030 twenty 70rpm eighteen.0N.M
NMRV030 twenty five 56rpm 20.0N.M
NMRV030 thirty 47rpm 24.0N.M

The worm gear is made up of a worm and a worm wheel. It is the simultaneous peak offset of vertical power transfer. Typically, the travel component is a worm. In purchase to merge the wheel/worm into a worm equipment, it is required to ensure that the center length is equal and the transmission ratio is equal. Heart distances are obtainable from inventory in little steps between 17mm and 80mm. Every center distance has a number of equipment ratios. The excessive force worm equipment is suitable for the production of worm gear drives with a shaft angle of 90°. Using a worm generate, extremely big reduction ratios (up to a hundred:1) can be reached.
Protection PROVISIONS: Worm drives should not be utilized as a locking mechanism to protected weighty objects, which might result in injuries or damage for the duration of reverse action. In non-possibly harmful apps, self-locking is needed to prevent reverse rotation, and then a minimal-pitch one-threaded worm is utilised to instantly lock the worm equipment to stop reverse rotation.

China wholesaler Motor Gear Speed Reduction for Gear Transmission     near me shop

Low soft start 3 phase motor supplier made in China – replacement parts – in Donetsk Ukraine Speed Reduction Ratio High Torque 10mm Metal Geared Motor with top quality

Low soft start 3 phase motor supplier  created in China - substitution components -  in Donetsk Ukraine  Velocity Reduction Ratio High Torque 10mm Metallic Geared Motor with top high quality

We – EPG Group the most significant worm gearbox, couplings and gears factory in China with 5 different branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Low pace reduction ratio high torque 10mm metal geared motor

Product Description

     

1)Specifications:

  • Product: ZWBMD571571-249
  • Rated Voltage: 3. V
  • No Load Speed: 66 rpm
  • No Load Current: 80 mA
  • Rated Load Speed: 58 rpm
  • Rated Load Current: 220 mA
  • Rated Load Torque: 158 gf.cm
  • Rated Torque of Gear Box: 2,000 gf.cm
  • Instant Torque of Equipment Box: 6,000 gf.cm
  • Total Length L: 34. mm
  • Gear Box Duration L1: 19. mm
Model Application Parameters Rated Torque of Gear Box Instant Torque of Gear Box Gear Ratio Gear Box Duration
L1
Rated At No Load At Rated Load Overall Size
L
Voltage Pace Recent Velocity Present Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWBMD571571-19 3. 909 70 763 215 24 two.4 27.eight 2000 6000 19 12.eight
ZWBMD571571-28 three. 617 70 518 215 36 3.5 2000 6000 28
ZWBMD571571-46 3. 375 80 315 215 39 3.eight 30.9 2000 6000 46 15.9
ZWBMD571571-69 3. 250 80 210 215 fifty eight 5.seven 2000 6000 sixty nine
ZWBMD571571-102 3. 169 80 142 215 86 eight.4 2000 6000 102
ZWBMD571571-151 3. 114 eighty 96 215 127 twelve.five 2000 6000 151
ZWBMD571571-168 3. 98 eighty 86 220 106 ten.4 34 2000 6000 168 19
ZWBMD571571-249 three. 66 eighty fifty eight 220 158 15 2000 6000 249
ZWBMD571571-368 three. 45 eighty 39 220 233 23 2000 6000 368
ZWBMD571571-546 3. 30 80 27 220 346 34 2000 6000 546
ZWBMD571571-809 3. twenty eighty eighteen 220 512 50 2000 6000 809

above requirements just for reference and customizable according to specifications.
 

two)2nd Drawing

 

3)Product information display

Application


 

Audio and visible equipments

notebook Laptop, camcorder, vehicle DVD, kinescope DVD, automobile CD player, camera, electronic digicam, headphone stereo, cassette tape recorder and and so on.

Home software

electric powered shaver, tooth brush, package ept appliances, hair clipper, sewing devices, massager, vibrator, hair dryer, rubdown equipment, corn popper, scissor hair device, vacuum cleaner, backyard garden resource, sanitary ware, window curtain, coffee device, whisk and and many others.

Workplace automation equipments

CD-ROM, OA equipments, scanners, printers, multifunction devices copy machines, fax, FAX 13083988828 paper cutter, pc peripheral, lender machine and etc.

Automotive products

conditioning damper actuator, doorway lock actuator, retractable rearview mirror, meters, optic axis handle system, head light beam degree adjuster, vehicle h2o pump, automobile antenna, lumbar assist, automated vending machine and and so on.

Toys and versions

radio control model, automatic cruise manage, ride-on toy and and so on.

Health care application

blood force meter, breath machine and etc.

Industrials

air freshener, show, movement handle valves and and many others.

Electric energy tools

electrical drill, screwdriver and and many others.

Precision instruments

keep track of, optics instruments and and so forth.

 

Our Services:

  • ODM & OEM
  • Gearbox design and advancement
  • Connected technological innovation assistance

Packaging & Shipping and delivery

1) Pac ept Particulars

packed in nylon first of all, then carton, and then bolstered with picket circumstance for outer packing.
Or in accordance to client’s need.

2) Shipping Information

samples will be transported inside 10 days
batch buy top time according to the actual scenario.

Organization Information:

HangZhou ept Equipment & Electronics Co., Ltd was set up in 2001,We give the total push remedy for clients from style, tooling fabrication, factors production and assembly. 

 

one) Competitive Advantages

  • one) Aggressive Advantages
    seventeen+yr expertise in producing motor gearbox
    We supply specialized help from r&d, prototype, screening, assembly and serial manufacturing , ODM &OEM
    Aggressive Price
    Product Efficiency: Minimal sound, Substantial effectiveness, Prolonged lifespan
    Prompt Supply: fifteen wor ept times soon after payment
    Modest Orders Recognized

 2) Major Merchandise

  • Precision reduction gearbox and its diameter:3.4mm-38mm,voltage:1.5-24V,electrical power: .01-40W,output speed:5-2000rpm and output torque:1. gf.cm -50kgf.cm,

  • Custom-made worm and gear transmission machinery
  • Precise electromechanical movement module
  • Specific part and assembly of plastic and metallic powder injection.

Certifications

We Have handed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and more…
 

FAQ

one. Can you make the gearbox with personalized specs?
Sure. We have design and style and growth crew, also a fantastic time period of engineers, every of them have
numerous operate several years encounter.

2.Do you offer the samples?
Of course. Our organization can provide the samples to you, and the supply time is about 5-15days according to the specification of gearbox you want.

three.What is your MOQ?
Our MOQ is 2000pcs. But at the commencing of our company, we take little get.

four. Do you have the merchandise in inventory?
I am sorry we donot have the product in stock, All merchandise are made with orders.

five. Do you offer engineering assistance?
Indeed. Our firm have design and style and advancement crew, we can offer technological innovation assistance if you
need to have.

six.How to ship to us?
We will ship the merchandise to you according to the DHL or UPS or FEDEX and so on account you offer. 

seven.How to shell out the funds?
We take T/T in advance. Also we have different bank account for obtaining funds, like US dollors or RMB and so on.

eight. How can I know the item is ideal for me?
Frist, you want to supply us the far more information data about the item. We will recommend the merchandise to you according to your requirement of specification. Following you validate, we will get ready the samples to you. also we will provide some good developments in accordance to your product use.

nine. Can I come to your company to visit?
Of course, you can come to our company to check out at whenever, and welcome to pay a visit to our business.

ten. How do get in touch with us ?
 Please send an inquiry 

/ The use of first gear manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the detailed alternative parts contained herein are not sponsored, accepted, or manufactured by the OEM. /

Low soft start 3 period motor supplier  created in China - replacement components -  in Donetsk Ukraine  Pace Reduction Ratio Higher Torque 10mm Metallic Geared Motor with best good quality

Low soft start 3 phase motor supplier  produced in China - substitution elements -  in Donetsk Ukraine  Velocity Reduction Ratio High Torque 10mm Metal Geared Motor with best top quality